3 mil white biaxially oriented polypropylene coated with an acrylic latex adhesive.
Heat Resistance (Excludes Acrylic/Plastics):
125-150° (F) 72 hours
200-250° (F) 2 hours
Test results showed that the adhesive created a residual layer on clear acrylic and other plastics when heated above ambient temperatures.
- Application Surface: Metals, Plastics, Glass, Painted Surfaces
- Substrate: Paper
- Thickness: 3 MIL (polyester)
Protex 8209L will provide superior pressure sensitive protection as well as abrasion resistance on a large variety of surfaces while providing the flexibility to conform to complex curves.
- Surface Sensitivity: Yes
- Adhesion Level: LOW
- Heat Tolerance: No heat applied, 100° - 150°, 150° - 300°
Typical Properties - Backing:
Basis Weight (gr. /24”) 3.4-3.6
Thickness (mils) 2.6-3.5
Elongation (% MD) 110
24” maximum width promotes optimum material handling conditions while minimizing waste.
Typical Properties - Adhesive:
Base - Acrylic
Adhesion to Steel (oz. /in width) - 6-14 (-1/+2)
(At time of manufacture)
- Typical Properties - Liner: No
Typical Properties - Storage:
Shelf life is 1 year if stored in a cool dry place, out of direct sunlight.
Standard Sizes Available:
48” x 60 yards2
48" x 100 yards
(2 Roll Minimum)
Slitting: Product may be cut to 1” up to 24 "
- PDF Download: Protex-8209L.pdf